DC SIGNAL SOURCE SS7012

DC Voltage and Current Signal Generator and Tester for Routine Maintenance of Standard Devices

The Hioki SS7012 is a compact DC signal source and calibrator that is used to perform maintenance or loop tests of instrumentation systems and can be operated from a computer via a USB cable. It can also be used to calibrate thermometers and measure DC voltage and DC current.

Dapatkan Penawaran

Diskusi dan Tanya Harga
Hubungi CS

Key Features

  • Improve stability and reduce calibration costs compared with the previous HIOKI model
  • For instrumentation systems (4 – 20 mA) and loop testing
  • Check temperature control equipment and electric distribution
  • 8 types of thermocouples to test thermoelectric power generation
  • Ideal for electrical device evaluating and routine maintenance of production equipment such as calibrators
  • Use the max. 25 mA DC sink as an electric load
Use of the AC Adapter and /or rechargeable batteries and dedicated charger is recommended.

Basic specifications [Generation functions]

Accuracy guaranteed: 1 year
Circuit method Bipolar sink and source
Constant voltage 2.5 V: 0 to ±2.5000 V (±0.03 % of setting ±300 μV, 100 μV resolution)
25 V: 0 to ±25.000 V (±0.03 % of setting ±3 mV, 1 mV resolution)
Constant current 25 mA: 0 to ±25.000 mA (±0.03 % of setting ±3 μA, 1 μA resolution)
Thermoelectric power generation K: at TC: 0 ˚C, -174.0 to 1372.0 ˚C (±0.05 % of setting ±0.5 ˚C, 0.1 ˚C resolution), Other types: E, J, T, R, S, B, N selectable
Thermoelectric power generation K: at TC: RJ, -174.0 to 1372.0 ˚C (±0.05 % of setting ±1.0 ˚C, 0.1 ˚C resolution), Other types: E, J, T, R, S, B, N selectable
Standard resistance (Rs) 100 Ω (±0.2 Ω)
Automatic generation Number of memory steps: 20, Interval time: 1 to 99 sec (at CV, CC, TC mode)

[Measurement functions]

Voltage 2.5 V: 0 to ±2.8000 V (±0.03 % rdg. ±300 μV, 100 μV resolution, 1 MΩ input resistance)
25 V: 0 to ±28.000 V (±0.03 % rdg. ±3 mV, 1 mV resolution, 1 MΩ input resistance)
Current 25 mA: 0 to ±28.000 mA (±0.03 % rdg. ±3 μA, 1 μA resolution, smaller than 30 Ω input resistance)
Temperature -25.0 to 80.0 ˚C (±0.5 ˚C at 23 ±5 ˚C, 0.1 ˚C resolution, use with the RJ sensor 9184)
Sampling rate Approx. 1.67 times/sec

[General functions]

Additional functions Zero adjustment, Overflow display, USB communication, Monitor
Power supply AC adapter 9445-02/-03 (100 to 240 V AC 50/60 Hz, 9 VA),
Ni-MH battery HR6 × 4, 6 VA, (fully charged 2500 mAh Ni-MH batteries: 170 minutes continuous use), or LR6 (AA) alkaline battery × 4, 6 VA
Dimensions and mass 104 mm (4.09 in) W × 180 mm (7.09 in) H × 58 mm (2.28 in) D, 660 g (23.3 oz) (including LR6 × 4 batteries)
Included accessories Input cord 9168 ×1, Test lead L9170-10 ×1, Fuse ×1, LR6 (AA) alkaline battery ×4, Instruction manual ×1

Kami adalah perusahaan yang bergerak di bidang industrial supply company, berdiri sejak tahun 2010. 

Menyediakan berbagai kebutuhan industri dan bisnis, mulai dari produk MRO (Maintenance, Repair, and Operation), alat keselamatan, perkakas tangan dan elektrik, alat kebersihan, hingga alat ukur dan analisa listrik

Cilegon Office & KARCHER Service Center:
Jl Boulevard Raya no 36-38. Ruko Grand Cilegon Resident Cibeber. Cilegon-Banten, Indonesia 4242
Phone / fax  : 0254 375765 / 0254 387163

Surabaya Office:
Jl. Puri Kencana Karah B-5 Surabaya 60232
Phone : 031 825 31779 

E-mail : www.kawanbaruteknik@ymail.com

Chat Kami